Mobile Lte Router Test

Want zu know if the end 4G Router works for you? perform a basic field prüfen on your mobile phone über using her mobile phone zu check die signal quality outside your house.

Du schaust: Mobile lte router test

To get much more accurate data, you re welcome disable die Wi-Fi link on her mobile phone. You tun können read signal bars followed über carrier name and network symbol.


You kann see what network kind you’re connecting zu (2G, 3G, 4G, LTE, etc.). Take klasse of signal bars und the symbol an the status riegel of your mobile phone and compare it with ns below chart.

The 4G routers kann connect zu 2G, 3G, and 4G mobile networks. However, zu get a fast speed und stable internet connection, we should input a durable 4G LTE signal zum the router. Zum example, if ns mobile symbol zu sein G/E/3G/H, the 4G router kann sein not work as well together it’s designed to. Please walk around to find an additional location that has the minimal 2-bar LTE signal reception.


SymbolMobile NetworksVoice CallInternet SpeedEmail & NotificationVideo
4G (LTE)Fourth generation or lang term evolutionalso recognized as LTE or WiMaxYes100Mbits/s+YesYes
3GThird Generationalso well-known as UMTS / WCDMA / CDMA2000Yes2Mbits/sYesYes
2GGPRS(General Packet radio Service)Yes50Kbits/sYesNo
EEDGE(Enhanced säule GSM Evolution)Yes100Kbits/sYesNo
H/H+HSPA(High-Speed Packet Access)Yes10-100Mbits/sYesYes
No SymbolIf signal bars get much more than 1 baryou kann use voice callN/ANoNoNo

To measure up mobile phone’s signal reception bei exact decibels instead of bars or dots, you can follow guidance zu enable the Field test Mode in mobile phones.


Decibel signal strengths möchte be negativ 2~3 digits. Unit of measurement zu sein dBm. If her phone nur a number such together 98, ns actual signal strength ist -98dB. The closer die number zu sein to zero, the better ns reception, deshalb -90dB zu sein a stronger signal than -100dB.

The number value von 2G / 3G / 4G H+ networks zu sein RSSI standard which is Received Signal stamin Indicator. LTE network is RSRP traditional which zu sein Reference Signal obtain Power.


*


Go into die Phone app und switch to ns Keypad. Dial *3001#12345#* und press Call button to launch the Field test Mode on your iPhone. In the iOS 14.8, tap die menu button on the top right corner.Click Serving cell Info, then nevigate zu Freq_band_ind. That is the LTE frequency band.Return to ns previous page und tap ~ above Rach effort and find ns RSRP value on the zuerst row.

Go into die Phone app und switch to die Keypad. Dial *3001#12345#* and press Call button to launch the Field prüfung Mode on her iphone. In die iOS 13.3, tap on LTE > Serving cell Info. Freq_band_ind is die LTE frequency band.Tap ~ above Serving cell Mass > Rsrp0 to check die LTE signal strength.

Go into ns Phone app and switch to die Keypad. Dial *3001#12345#* and press Call button to launch the Field prüfung Mode on your iPhone. In iOS 12, tap on Serving cabinet Measurements to check ns strength and band.
*

On google Play store, search for Network Cell die info Lite und install it.Make sure inserted a workable sim card an the phone, turn on general practitioners on ns phone, und open die above newly mounted APP.Tap top top Raw to check die frequency band and signal strength.

Go kommen sie Settings > about Phone > zustand > sim Status und numerical signal strength wollen be accessible on one of two people network or status which depends on the model of phone.

You can also use apps to nur signal strength an decibels in Android phones.


When ns 4G router is turned on v a workable sim card, log bei the 4G router admin, we can find ns modem device information on ns right column von the front page.

The cell phone modem model, IMEI number, und connection zustand are listed bei the machine column. Click ns “Reacquire” button we kann get ns updated modem information.

Since EV3117 firmware version, the mobile protocol has switched kommen sie “MobileData”. The “Signal Strength” changed kommen sie a portion number weil das easier understanding.

To read the exact decimal signal strength, you re welcome use ns below MMCLI commands on SSH terminal.


SSH TERMINAL

After logging bei the router admin, go zu System > Terminal. Enter the router user benennen root and router password, which does not shows trost when inputting, zu enter die command-line user interface on die web browser.

Mehr sehen: Hausboot In Mecklenburgische Seenplatte & Müritz, Hausboote, Motoryachten Mieten


Verify Modem Sequence

mmcli -LTo list ns current modem.

If die router has notfall set nach oben a 4G connection, ns guardian module möchte automatically restart die modem. Die modem will disappear from the list temporarily. We kann use the below command to überwacht the modems.

mmcli -M Press Ctr+Z on ns keyboard kommen sie exit the überwacht status.


Check Signal Strength

mmcli -m 0 –signal-setup=30

Set die signal refreshing rate zu 30 seconds. You can change the interval zu 20 seconds über replacing 30 to 20.

mmcli -m 0 –signal-get

To list die decimal signal strength des the currently connecting network.


Insert a sim karte card, revolve on ns power, und log in the 4G router admin. On the right column of the former page, you kann check the modem machine information, including mobile network band und signal strength.

Click die Reacquire taste to get the updated signal toughness information.

The network band is die current mobile network connecting to.RSRP value zu sein the signal strength. When connecting to 3G WCDMA or UMTS network, please check ns RSSI value.

Since ns mobile link is bei the zuerst priority, on the zuerst boot, ns device info will take a few minutes to nur completely.


SSH TERMINAL

After logging in the router admin, go zu System > Terminal. Enter the router user nennen root and router password, which does not shows hoch when inputting, to enter the command-line interface on die web browser.


Verify simkarte Registration

Enter gcom command zu verify the sim karte card installation und registration.

If it shows SIM error, please check if the sim karte card is workable; if the simkarte card inserts in the exactly slot, ns default setting is used SIM1 slot.

If die Registration ist Failed, please examine if the simkarte card is already activated.


Check Signal Strength

Enter the below uqmi command zu check ns instant cell phone network type and signal stamin (unit zu sein dBm).

uqmi -d /dev/cdc-wdm0 –get-signal-info

The above uqmi command does not work under die 4G-PPP protocol.


Signal bars vs decibel signal strength
Signal BarsiPhone MobileNokia Phone
5> -85 dBm> -91 dBm
4-85 ~ -90 dBm-91 ~ -101 dBm
3-90 ~ -95 dBm-101 ~ -103 dBm
2-95 ~ -100 dBm-103 ~ -107 dBm
1-100 ~ -105 dBm-107 ~ -113 dBm
0

4G mobile phone call networks has two different standards FDD LTE und TDD LTE. Both des them space used to maximize ns available bandwidth.

Mehr sehen: Iphone 5 Fotos Auf Pc - Bilder Von Iphone Auf Pc Übertragen

FDD LTE offers a paired spectrum with various frequencies kommen sie transmitting (uplink) und receiving (downlink) signals simultaneously. TDD LTE supplies unpaired spectrum because ns working frequency zum transmitting (uplink) und receiving (downlink) is exactly same.


FDD-LTE BandUplinkDownlinkBand WidthDuplex SpacingGuard Band
B11920 – 1980 MHz2110 – 2170 MHz60 MHz190 MHz130 MHz
B21850 – 1910 MHz1930 – 1990 MHz60 MHz80 MHz20 MHz
B31710 – 1785 MHz1805 – 1880 MHz75 MHz95 MHz20 MHz
B41710 – 1755 MHz2110 – 2155 MHz45 MHz400 MHz355 MHz
B5824 – 849 MHz869 – 894 MHz25 MHz45 MHz20 MHz
B6830 – 840 MHz875 – 885 MHz10 MHz35 MHz25 MHz
B72500 – 2570 MHz2620 – 2690 MHz70 MHz120 MHz50 MHz
B8880 – 915 MHz925 – 960 MHz35 MHz45 MHz10 MHz
B91749.9 – 1784.9 MHz1844.9 – 1879.9 MHz35 MHz95 MHz60 MHz
B101710 – 1770 MHz2110 – 2170 MHz60 MHz400 MHz340 MHz
B111427.9 – 1452.9 MHz1475.9 – 1500.9 MHz20 MHz48 MHz28 MHz
B12698 – 716 MHz728 – 746 MHz18 MHz30 MHz12 MHz
B13777 – 787 MHz746 – 756 MHz10 MHz– 31 MHz41 MHz
B14788 – 798 MHz758 – 768 MHz10 MHz– 30 MHz40 MHz
B151900 – 1920 MHz2600 – 2620 MHz20 MHz700 MHz680 MHz
B162010 – 2025 MHz2585 – 2600 MHz15 MHz575 MHz560 MHz
B17704 – 716 MHz734 – 746 MHz12 MHz30 MHz18 MHz
B18815 – 830 MHz860 – 875 MHz15 MHz45 MHz30 MHz
B19830 – 845 MHz875 – 890 MHz15 MHz45 MHz30 MHz
B20832 – 862 MHz791 – 821 MHz30 MHz– 41 MHz71 MHz
B211447.9 – 1462.9 MHz1495.9 – 1510.9 MHz15 MHz48 MHz33 MHz
B223410 – 3500 MHz3510 – 3600 MHz90 MHz100 MHz10 MHz
B232000 – 2020 MHz2180 – 2200 MHz20 MHz180 MHz160 MHz
B241625.5 – 1660.5 MHz1525 – 1559 MHz34 MHz– 101.5 MHz135.5 MHz
B251850 – 1915 MHz1930 – 1995 MHz65 MHz80 MHz15 MHz
B26814 – 849 MHz859 – 894 MHz35 MHz45 MHz10 MHz
B27807 – 824 MHz852 – 869 MHz17 MHz45 MHz28 MHz
B28703 – 748 MHz758 – 803 MHz45 MHz55 MHz10 MHz
B29N/A717 – 728 MHz11 MHzN/AN/A
B302305 – 2315 MHz2350 – 2360 MHz10 MHz45 MHz35 MHz
B31452.5 – 457.5 MHz462.5 – 467.5 MHz5 MHz10 MHz5 MHz
B661710 – 1780 MHz2110 – 2200 MHz90/70 MHz420 MHz330 MHz
B71663 – 698 MHz617 – 652 MHz35 MHz-46 MHz11 MHz

TDD-LTE BandFrequencyBand Width
B331900 – 1920 MHz20 MHz
B342010 – 2025 MHz15 MHz
B351850 – 1910 MHz60 MHz
B361930 – 1990 MHz60 MHz
B371910 – 1930 MHz20 MHz
B382570 – 2620 MHz50 MHz
B391880 – 1920 MHz40 MHz
B402300 – 2400 MHz100 MHz
B412496 – 2690 MHz194 MHz
B423400 – 3600 MHz200 MHz
B433600 – 3800 MHz200 MHz
B44703 – 803 MHz100 MHz